Rubik's Clock timer
A timer for Rubik's Clock, the flat puzzle with nine clocks on each side. It shows a clock scramble of pins and dial turns, counts down 15 seconds of inspection and keeps your averages as you go. Your solves stay in this browser, and no account is needed.
For scrambles without the timer, or a numbered list of them, use the Clock scramble generator.
Clock scrambles
Rubik's Clock has nine clocks on each side, four dials at the corners and four pins. The corner clocks are shared by both sides, so 14 clocks move on their own, and their hands alone give 1,283,918,464,548,864 combinations. The pins decide which clocks turn together when you turn a dial.
Each scramble here follows the order of WCA clock scrambles: the four corners one by one, then the top, right, bottom and left pairs and all four pins, then it turns the puzzle over and does the pairs and all four pins again. Every amount is picked at random, which makes every position of the hands equally likely. Hold the puzzle with 12 o'clock on top, with either side in front:
- UR, DR, DL, UL: push up the top right, bottom right, bottom left or top left pin.
- U, R, D, L, ALL: push up the two top, right, bottom or left pins, or all four.
- UR3+: with those pins up, turn a dial next to one of them three hours clockwise, then push all pins down. A minus turns it counterclockwise, and 0+ leaves it where it is.
- y2: turn the puzzle over, keeping 12 o'clock on top.
More on reading moves: cube notation.
How clock is timed in competition
A round of clock is five solves, ranked by the average of five: the best and the worst are dropped and the result is the mean of the other three. The fastest single solve is ranked as well.
Inspection is 15 seconds, with two seconds added for starting late and a DNF after 17. Clock solves are short, and the moves of most methods depend on the numbers on the clocks, so inspection is when you read them and work out the first turns.
Methods
A first method solves a cross on each side, with every edge clock at 12, and then the corners one by one. Faster methods fix an order of pin settings and solve the puzzle in 14 moves or fewer.
One of them is 7-simul: seven steps, each turning a dial on the front and one on the back at the same time. Some of the amounts have to be worked out from the starting position, which is what inspection is for.
Questions
Do I need algorithms to solve Rubik's Clock?
Not in the usual sense. In 7-simul the pin settings and their order are always the same, and the amount of each turn is worked out from the clocks in front of you. What takes practice is reading them fast.
Why do the turns in the scramble go from 5- to 6+?
Twelve hours make a full turn, so the twelve amounts from five hours counterclockwise to six hours clockwise, 0+ included, reach every position of a hand once. Six hours counterclockwise would land in the same place as 6+, so it never appears.
Do I need an account to use the timer?
No. The timer works without one and keeps your solves in this browser. An account syncs them between your devices.
Does it work on a phone?
Yes. Touch and hold the screen until the timer is ready, let go to start and tap to stop.
Timers for other events
3x3 timer, 2x2 timer, 4x4 timer, 5x5 timer, 6x6 timer, 7x7 timer, 3x3 one-handed timer, 3x3 blindfolded timer, 4x4 blindfolded timer, 5x5 blindfolded timer, 3x3 multi-blind timer, 3x3 fewest moves timer, Pyraminx timer, Megaminx timer, Skewb timer, Square-1 timer, and the Rubik's cube timer for all 17 WCA events.